Strips & Seals
-
ASEC Surface Fit Fire & Smoke Intumescent Door Kit
This Asec Surface Fit Fire & Smoke Intumescent Door Kit helps to protect the integrity of doors and prevent the spread of fire and smoke, making it an ideal investment when fireproofing properties. With an integrated smoke seal, the kit is made from a self adhesive intumescent sheet which, when heated, expands to many times its original volume, sealing the gap around the door to help provide an effective barrier against the passage of fire and smoke. The kit has been fire tested for up to 1 hour and is Certifire approved. Kit Contains: 3 lengths of 1.65mm thickness x 1050mm lengths 2 lengths of 1.05mm thickness x 1050mm lengths
View Product -
BRITON 2420.IP Intumescent Pack To Suit 2400 series Cam Action Door Closers
The 2420.IP is an Intumescent Pack to be used with the Briton 2400 series Cam Action Door Closers. A significant amount of fire resisting doorset material is removed when concealed closers are mortised into the door leaf. The intumescent gasket set will provide the additional performance that is required to protect the door from integrity failure during fire conditions. It is particularly important with these closers to check that the details of the fire test certification are relevant to your intended door application.
View Product -
CODELOCKS Fire Kit Intumescent Pack To Suit All Codelocks Tubular Latch Digital Locks
An intumescent fire kit to fit on new or existing applications, it is suitable for all Codelocks mechanical or electronic digital locks which operate a tubular latch. It is suitable for use on both 30 and 60 minute fire doors and comes with full installation instructions.
View Product -
DORMAKABA ITL Intumescent Door Kit
The ITL Intumescent Door Kits from Kaba been successful in fire tests to BS EN 1634-1, for between 30 and 60 minutes duration (depending on pack type) when correctly fitted to with Kaba Digital Locks. Both the Simplex and Eplex range of push button locks were tested along with their intumescent protection. Testing proved that the push button locks, when correctly fitted with the intumescent material, are non detrimental to the integrity and performance of the fire doors. The correct Kaba Intumescent Door Kits must be fitted to the relevant push button lock for use on a fire door, in accordance with the fire assessment. The Kaba ITL Intumescent Door Kits are available in 2 types and suit the following push button locks. Type 1 (60 minute fire rated) To suit 1000, L1000, 5000, 6200, E5000, E5200 & E5700 series locks. Type 2 (30 minute fire rated) To suit 7000 series locks (excluding 7106).
View Product -
FIRESTOP 2.1m Intumescent Strip – Fire & Smoke
A range of strips from Firestop to provide a seal for fire rated timber door edges and frames. They are suitable for rebates in timber door leafs or frames in single and double action, single or double doors. Seals are supplied in 2.1m lengths with a brush pile smoke / draught strip as standard and are quick and easy to fit with no special tools required. They are supplied with an acrylic self-adhesive tape backing for ease of application.
View Product -
FIRESTOP 2.1m Intumescent Strip – Fire Only
A range of strips from Firestop to provide a seal for fire rated timber door edges and frames. They are suitable for rebates in timber door leafs or frames in single and double action, single or double doors. Seals are supplied in 2.1m lengths as standard and are quick and easy to fit with no special tools are required. They are supplied with an acrylic Self-Adhesive tape backing for ease of application.
View Product -
FIRESTOP Applique 37 Drop Down Seal
The FIRESTOP Applique 37 Drop Down Seals are designed to form an effective barrier against the outside climate, including noise, light, fire, smoke and insects, and are activated by the closing action of the door, meaning that the seal only drops down when the door is closed. The seals are available in a variety of lengths and can be cut down to size and are supplied with complete screws, to ensure quick and easy fitting on either the inside or the outside of the door.The seals are acoustically tested in accordance with BS EN ISO 140-3:1995 achieving a rating of up to 37dB Rw, fire tested to BS476: Part 20/22: 1987 to 60 minutes and smoke tested to BS EN 1634-3: 2004. It has a satin anodised aluminium finish with galvanised steel flat springs and reinforced actuators and is endurance-tested to 200,000 cycles with a 14mm maximum drop.
View Product -
FIRESTOP Intumescent Kit To Suit Asec 5 Lever BS Deadlock
This FIRESTOP Intumescent Kit is designed to suit the Asec 5 Lever BS Deadlock. Manufactured from interdens, it can be cut down to size and features zero pressure foam expansion. It has been tested to BS476 Part 22: 1987 & BS EN 1634-1: 2014 and is both 30 and 60 minute rated. The semi rigid interdens with a self-adhesive backing ensure easy application.
View Product -
FIRESTOP Intumescent Kit To Suit Asec 5 Lever BS Sashlock
This FIRESTOP Intumescent Kit is designed to suit the Asec 5 Lever BS Sashlock. Manufactured from interdens, it can be cut down to size and features zero pressure foam expansion. It has been tested to BS476 Part 22: 1987 & BS EN 1634-1: 2014 and is both 30 and 60 minute rated. The semi rigid interdens with a self-adhesive backing ensure easy application.
View Product -
FIRESTOP Intumescent Kit To Suit Asec Flat Pattern Mortice Latch
This FIRESTOP Intumescent Kit is designed to suit the Asec Flat Pattern Mortice Latch. Manufactured from interdens, it can be cut down to size and features zero pressure foam expansion. It has been tested to BS476 Part 22: 1987 & BS EN 1634-1: 2014 and is both 30 and 60 minute rated. The semi rigid interdens with a self-adhesive backing ensure easy application.
View Product -
FIRESTOP Intumescent Kit To Suit Asec Vital 5 Lever BS Deadlock
This FIRESTOP Intumescent Kit is designed to suit the Asec Vital 5 Lever BS Deadlock. Manufactured from interdens, it can be cut down to size and features zero pressure foam expansion. It has been tested to BS476 Part 22: 1987 & BS EN 1634-1: 2014 and is both 30 and 60 minute rated. The semi rigid interdens with a self-adhesive backing ensure easy application.
View Product -
FIRESTOP Intumescent Kit To Suit Asec Vital 5 Lever BS Sashlock
This FIRESTOP Intumescent Kit is designed to suit the Asec Vital 5 Lever BS Mortice Sashlock. Manufactured from interdens, it can be cut down to size and features zero pressure foam expansion. It has been tested to BS476 Part 22: 1987 & BS EN 1634-1: 2014 and is both 30 and 60 minute rated. The semi rigid interdens with a self-adhesive backing ensure easy application.
View Product